Technical Details of Fue Hair Transplant
Technical Details of fue hair transplant
The correct selection of the diameter of the extractions punches used also influences the success of the extrusion together with these parameters and given. Let's give an example: Let's say you want to collect 3000 grafts with 0.8mm punch from a donor area. If there is a donor area within the 3000 grafts where we can say that the patient is in our normal / average density and quality; the combined graft rate should not exceed 15%. In other words, a maximum of 4500 grafts must be removed. If the doctor can do this with a 0.8mm punch, the punch has a correct diameter but it can not do it with a diameter of 0.7mm, if it works with a diameter of 700-800, but if a total of 3200 grafts, it can not hold up to 15%. 3200/800 would indicate a graft ratio of 25%, indicating that the donor region is not used well.
Ez sentence, it is more possible to remove excess grafts in small diameter pucnhs, but if this graft quality is deteriorated, it decreases the chances of success of the operation. Because the main factor that contributes to filling and density in hair transplantation is the high ratio of graft quality and the ratio of triple / multiple grafts in the total number of grafts.
Here, let's continue the path by giving an ideal patient operation example: You have collected 3000 grafts, you have used 0.8mm punch. 350 unions, and the remaining 2650 grafts were configured as 50% / 50% in pairs / triplets.
Now according to your plan of operation you will transfer this ideal total number to a patient with hair loss of 35 to 40 grafts per cm2 norwood4 degrees. The figure 35-40 is also an ideal figure. The cause creates a scalable hair density. Also the number of grafts per cm2 is 40, the retention rate is the highest density ratio. So if you want to do 60, you will risk the retention rate this time.
When you move to the October phase;
The advantage of using 0.8mm punch instead of taking with 0.9mm punch is that you will live in the sowing channels. Because the diameter of the sowing channels must match the diameter of the intake punches. Again, for example, if you want to open a 0.6mm diameter graft with a 0.8mm graft, and unfortunately, the graft is damaged and does not grow, hold, or grow during placement.
You specify the ideal number of grafts per cm2 in the sowing channels and you have chosen the diameter of the sowing channels correctly, but that's not enough. We also need to change the densities according to the special areas of the sowing area, for better results and images. If you have an average of 40 grafts per well cm2 in your hand and you have nrw4 degrees in your hospital, these 3,000 grafts will look like a parquet floor, but when you see the image, you may find yourself successful in pre / post photos, but details are important. For example, they are all planting patients of equal density and in fact may not be pleased when you examine them carefully. The reason is most probably that the intensity in the bridge "bridge" should be a little more so that the patient is still round and somewhat clear when looking at this area covering the roundness.
We call this area "curtain planting area". The more frequent study of this region, the result of hair transplantation is more satisfying for the patient and the doctor.
Of course this is not enough. Let's say you created the curtain. At this stage, what the doctor needs to know is shudder. It is necessary to open sowing channels at different depths in these different regions, even if they open the sowing channels by choosing appropriate diameters when hair reaches the sowing line, the front region, the curtain and the bridge region and finally the back region. It is also scientifically necessary. At the same time, the donor should combine these choices with the length of the hair follicles he removes from the field. Deeper and more frequent channels than necessary undermine the deep circulation and result in the hair not being held in large circles.
This is the most undesirable result for the patient and the doctor.
A doctor who does everything right until this stage has no reason not to be perfect if his assistants have long, steady, stable association with grafts in the sowing tracts so that they are educated in this area.
- Rigorous analysis
- Correct information on the structure of hair follicles receiving donor per operation
- Quality extraction with this information / sufficient number of grafts
- Correct plan and correct plant configuration
- Correct sowing channels
- Accurate placement
Doctors who have integrated these 6 parameters and matched each other in harmony and that produce this vision, the aesthetic accumulation and the vision of this hospital, have always helped their patients and produced correct solutions to their complaints and hair loss problems.
Excellent results are always possible on this way.